Loading..

Product was successfully added to your shopping cart.





No products in the cart.

Login to earn Valiants Reward Points for sharing!
General product image. Actual product may vary from image(s).

Stoptech Acura TSX/TL/MDX/CL / Honda Accord Front Left Drilled Zinc Plated 300x28mm Aero-Rotor Kit

Be the first to review this product

SKU: st81.059.9941L
Part Number: 81.059.9941L
Notes: Drilled AeroRotor
Manufacturer: StopTech
Rotor Size: 300x28mm
Position: Front Left
Finish: Zinc Plated

Product Category: Brake Rotors

Our Price: $544.50

StartYear EndYear Make Model SubModel Cyl Lit Fuel FuelDel ASP EngDesg Notes
1999 2004 HONDA ODYSSEY ALL ALL ALL ALL ALL ALL ALL
1999 2008 ACURA TL ALL ALL ALL ALL ALL ALL ALL Standard Front Caliper
2001 2003 ACURA CL ALL ALL ALL ALL ALL ALL ALL
2001 2006 ACURA MDX ALL ALL ALL ALL ALL ALL ALL
2003 2008 HONDA PILOT ALL ALL ALL ALL ALL ALL ALL
2003 2012 HONDA ACCORD EX;EX-L V6 3.0 ELECTRIC/GAS ALL ALL ALL Coupe;Sedan; Standard Trans; 6-Speed Trans;
2004 2013 ACURA TSX ALL ALL ALL ALL ALL ALL ALL
Description

Details

StopTech Brake Rotors - AeroRotors: StopTech AeroRotors are patented 2-piece hat and rotor assemblies designed to replace original factory rotors while working with the factory brake calipers. Each StopTech AeroRotor Kit contains a pair of AeroRotors to fit the front or rear axle of your vehicle. Although the AeroRotors are a direct replacement for factory rotors, StopTech AeroRotors offer significantly improved cooling and overall braking performance thanks to several design enhancements and patented innovations.

The 2-piece directional, floating AeroRotors are specifically designed to allow independent expansion of the rotor and hat without coning thanks to elongated drive pin holes. Available in MAX-float for racing, or controlled float for quiet street use, AeroRotor components include an AeroRotor friction ring with a patented AeroVane design and pre-assembled directional billet aluminium AeroHat with carefully engineered directional stand-offs to optimize cooling airflow. The panted AeroVane design pushes up to 61% more air for better cooling and reduced fade on the track.

By using lightweight aircraft-grade aluminum for the hats, the 2-piece AeroRotors are up to 8 pounds lighter than stock rotors. The lighter rotational weight allows for faster acceleration and deceleration, and nimbler handling.

StopTech AeroRotors are available in slotted or cross-drilled finish. Slots and holes allow better dissipation of heat, friction material and debris - assuring fresh pad material is in contact with the rotor face every time.

An optional anti-corrosion gold zinc coating benefits customers who live in cold climates, where snow and road salt are commonly encountered. Zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of rotors.
StopTech AeroRotors are 100% made in the USA, with both casting and machining taking place in California.

*StopTech AeroRotor Rings*
The patented 2-piece AeroRotor assembly uses uniquely designed and patented AeroVanes inside the disc to optimize airflow through the rotor. This improved directional design minimizes turbulence and flows up to 61 percent more air than any other rotor tested. The result is up to 80 percent better airflow over original equipment rotors and 10-30 percent better airflow than other directional vane racing rotors currently available. Better airflow equals better cooling, and better cooling means less fade and better overall brake system performance.

StopTech AeroRotors also feature a proprietary alloy chemistry. By adding molybdenum to the gray iron, carefully targeting a narrow range of hardness and tensile strength values, and controlling the cooling rate of the rotor after casting, StopTech produces a friction ring with added crack resistance as well as improved functionality.

*Drive Pins*
In certain applications where packaging is an issue - such as on the Chevrolet Corvette - StopTech uses slant-head drive pins to provide improved clearance as pads wear.

*Zinc Plating*
Zinc Plating, available on StopTech AeroRotors, prevents corrosion. This is particularly useful in winter climates where road salt and other environmental factors may increase the likelihood of oxidation.
Additional

Additional Information

Manufacturer Description


StopTech was founded in March of 1999 with a singular mission: Become the leading manufacturer and supplier of high performance brake components and systems. United by their passion for racing and high performance vehicles, the founding staff sought to challenge the status quo in known brake technology, and set new paradigms for brake upgrade systems.

In service of the mission, and as a direct result of our ongoing brake research, StopTech has to date received three patents in brake technology and has one patent currently pending.

StopTech is the first aftermarket brake company to offer balanced front brake upgrades, engineered to dramatically improve overall braking performance while remaining compatible with the stock OE rear brakes. This has significantly advanced the state of art in aftermarket brake upgrades.

StopTech is now the worldwide leader in Balanced Brake Upgrades™ for production cars, with over 277 platform offerings. The company consistently wins braking contests performed by independent publications, and is now the dominant, preferred brake system in the SPEED World Challenge® Touring Car Series, the most competitive, production based sprint race series in North America. The company also participates in Grand-Am® Cup, the premier production based endurance racing series in North America.

Core competencies: StopTech engineers and manufactures high performance brake rotors, calipers, DOT compliant stainless steel lines, and brake upgrade systems for the racing and performance street markets. The company distributes OE aftermarket rotors, brake pads and brake fluid. StopTech's ST-40 and ST-60 calipers are manufactured using a squeeze-forged process.

Caliper bodies, hats, and brackets are machined to ISO standards at StopTech's manufacturing facilities in Torrance, California using the latest CNC machines that feature active tooling.

StopTech has received the prestigious TüV approval in Europe for a number of its offerings, and has been selected as the exclusive brake supplier by a major OE aftermarket division.
The future vision of StopTech is to maintain focus on its original mission. In doing so, the company will continually innovate significant improvements to brake technology for street and racecars, for enthusiasts and professionals alike.
Manufacturer Part Number 81.059.9941L
Reviews
  1. Be the first to review this product

Add a review

How do you rate this product?

Quality

Price

Value