Loading..

Product was successfully added to your shopping cart.





No products in the cart.

Login to earn Valiants Reward Points for sharing!
General product image. Actual product may vary from image(s).

AEM Infinity 6/8h Plug and Play Jumper Harness: Honda K Series Engines

Be the first to review this product

SKU: aem30-3502
Part Number: 30-3502
Notes: Infinity 6/8h Plug & Play Jumper Harness
Manufacturer: AEM Electronics
Product Category: Stand Alone Engine Management

Our Price: $249.95

StartYear EndYear Make Model SubModel Cyl Lit Fuel FuelDel ASP EngDesg Notes
1988 1991 HONDA CIVIC ALL ALL ALL ALL ALL ALL ALL w/ K-Series Engine
1992 1995 HONDA CIVIC ALL ALL ALL ALL ALL ALL ALL w/ K-Series Engine
1993 1997 HONDA CIVIC DEL SOL ALL ALL ALL ALL ALL ALL ALL w/ K-Series Engine
1994 2001 ACURA INTEGRA ALL ALL ALL ALL ALL ALL ALL w/ K-Series Engine
1996 2000 HONDA CIVIC ALL ALL ALL ALL ALL ALL ALL w/ K-Series Engine
2001 2005 HONDA CIVIC ALL ALL ALL ALL ALL ALL ALL w/ K-Series Engine
2002 2005 ACURA RSX ALL ALL ALL ALL ALL ALL ALL
2002 2005 HONDA CIVIC ALL L4 2.0 ALL ALL ALL K20A3
2002 2005 HONDA CR-V ALL ALL ALL ALL ALL ALL ALL
2003 2005 HONDA ACCORD ALL L4 2.4 ALL ALL ALL K24A4
2003 2005 HONDA ELEMENT ALL ALL ALL ALL ALL ALL ALL
2004 2005 ACURA TSX ALL ALL ALL ALL ALL ALL ALL
Description

Details

AEM Infinity Plug N Play EMS Harness: The Infinity Plug & Play programmable ECU includes an application-specific start-up calibration and connects via a Plug & Play harness that is sold separately (PN 30-3500). Begin by determining which Infinity ECU will best support the ancillary components.

*Complete Stand Alone Engine Control*
The Infinity ECU combines with the Plug & Play harness to replace the factory ECU and control all of the engine functions. For some vehicles, an AEM MAP sensor (sold separately) is required for proper operation of the Infinity ECU on this application.

*Plug & Play Harness with Expansion Port*
AEM’s sealed, weatherproof Plug & Play harness (sold separately) includes dual Lambda connectors, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.
Additional

Additional Information

Manufacturer Description
When racer and enthusiasts buy AEM performance parts, they are getting the finest engineering, highest quality and best value our industry has to offer. Look no further than our products for proof. Years ago, we wanted to make a stand alone engine management available to the masses by developing a Programmable Engine Management System (EMS) that plugs into a factory wiring harness. We did, and our Series 1 and 2 Plug & Play EMS systems are on thousands of racecars. But if you aren’t improving, your aren’t winning, which is why we are proud to introduce our Infinity programmable engine management system. It’s a quantum leap over our existing technology and almost any engine control technology you can find anywhere. Its only tuning is – truly – your imagination.

Our Wideband UEGO Controller was the first product to incorporate a gauge interface with a wideband air/fuel controller. We’ve upped the ante again by introducing a Wideband Failsafe Device – a combined Wideband controller unit and boost gauge that proactively monitors AFR and Boost to save your engine should your AFR stray outside of a selected range.

In 2007, we introduced our Water/Methanol Injection System and have refined the components to deliver what we feel is the most reliable system on the market. But failures happen, and since we could not find a Failsafe device that truly protected an engine, we design one. Our water/Methanol Failsafe device monitors the entire injection curve to trigger an alarm event under any condition, allowing you to use your water/methanol system with complete peace of mind.

And there’s more! From our new AQ-1 Data Logger, to our Dyno-Shaft On-Vehicle Dynomometer to our High Output Coils that deliver CDI spark energy and inductive coil-like duration, we design, engineer and source parts that work better, offer more features and ultimately help you win.
Manufacturer Part Number 30-3502
Reviews
  1. Be the first to review this product

Add a review

How do you rate this product?

Quality

Price

Value