Loading..

Product was successfully added to your shopping cart.





No products in the cart.

Login to earn Valiants Reward Points for sharing!
General product image. Actual product may vary from image(s).

GSC P-D 4G63T EVO 1-9 Stage 3 Beehive Valve Springs w/ Titanium Retainer Valvetrain Kit

Be the first to review this product

SKU: gsc5041
Part Number: 5041
Notes: Spring/Retainer Kit; Beehive Single High Pressure Spring; Titanium Retainer; Uses OEM Spring Seat
Manufacturer: GSC Power Division
Lift CB: 0.620"
Seat Pressure: 97 @ 1.57 / 238 @ 0.450"

Product Category: Valvetrain

Our Price: $386.39

StartYear EndYear Make Model SubModel Cyl Lit Fuel FuelDel ASP EngDesg Notes
1990 1994 EAGLE TALON ALL L4 2.0 ALL ALL T ALL
1990 1994 MITSUBISHI ECLIPSE ALL L4 2.0 ALL ALL T ALL
1990 1994 PLYMOUTH LASER ALL L4 2.0 ALL ALL T ALL
1991 1992 MITSUBISHI GALANT ALL L4 2.0 ALL ALL T ALL
1992 1992 MITSUBISHI LANCER EVOLUTION I L4 2.0 ALL ALL T 4G63
1993 1994 MITSUBISHI LANCER EVOLUTION II L4 2.0 ALL ALL T 4G63
1995 1995 MITSUBISHI LANCER EVOLUTION III L4 2.0 ALL ALL T 4G63
1995 1998 EAGLE TALON ALL L4 2.0 ALL ALL T ALL
1995 1999 MITSUBISHI ECLIPSE ALL L4 2.0 ALL ALL T ALL
1996 1996 MITSUBISHI LANCER EVOLUTION IV L4 2.0 ALL ALL T 4G63
1997 1998 MITSUBISHI LANCER EVOLUTION V L4 2.0 ALL ALL T 4G63
1999 2000 MITSUBISHI LANCER EVOLUTION VI L4 2.0 ALL ALL T 4G63
2001 2002 MITSUBISHI LANCER EVOLUTION VII L4 2.0 ALL ALL T 4G63
2003 2005 MITSUBISHI LANCER EVOLUTION;EVOLUTION MR;EVOLUTION RS L4 2.0 ALL ALL T 4G63
2006 2006 MITSUBISHI LANCER EVOLUTION;EVOLUTION MR;EVOLUTION RS;EVOLUTION SE L4 2.0 ALL ALL T 4G63
Description

Details

GSC Power Division Spring / Retainer Kits: GSC has two options for retainers you can either have Chro-Molly or Titanium do to the type of abuse a street cars valve train sees we suggest Chro-Molly and Ti for race car applications. The Chro-Molly will last just as long as the stock units that they will replace. Unlike Titanium these will not become brittle over time. They are only a few grams heavier than Titanium and will not affect performance. GSC Chro-Molly retainers are universal to use with either our single valve springs or our dual springs. The single valve springs do not require a new seat or different seals where as the duals will.

A set of valve springs can be changed in a matter of 2 hours with the correct tools, and is the best insurance a car with upgraded cams can have. The single springs have been tested higher but we suggest a max rev limit of 8500rpms. If higher revs or prolonged periods of revving i.e. road race applications, we suggest going to our dual springs which is more stable at higher rpms and can be revved to 10500rpms. The Single Spring kit includes: Single springs 78@39.6 with either Titanium or Chro-Molly Retainer.


*Beehive Spring Set*
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring.

The retainer side of the valve spring has a smaller diameter to greatly reduce coil spring surging and improve valve control even at extreme rpm levels.

Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.

Each new design is tested to 9,000RPMS so you can rest assure that you have the best possible valve spring set available on the market.

The GSC Beehive spring is a factory replacement and will use your stock OEM retainer and Valve Seat to ensure an easy install.
Additional

Additional Information

Manufacturer Description
GSC Power-Division specializes in performance products for the aftermarket including precision ground chilled billet camshafts for the Mitsubishi Lancer Evolution from the EVO 1 all the way to the Evo 9 Mivec motors, Mitsubishi 4G63 powered DSMs and GVR4, New camshaft are the Subaru EJ25 US Spec STI camshaft sets, Nissan SR20DET camshafts, and 2JZ-GTE Camshafts. Our Cams speak louder then words with unmatched performance and quality.
Manufacturer Part Number 5041
Reviews
  1. Be the first to review this product

Add a review

How do you rate this product?

Price

Value

Quality